I Stoc Táirge Te
ULS401P
ULS401P LS401P LS-401P PANASONIC Laser Amplifier (with display), connector type, 2 outputs PNP
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Cábla:
-(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.Main cable (4-core): CN-74-C1 (cable length 1 m3.281 ft), CN-74-C2 (cable length 2 m6.562 ft), CN-74-C5 (cable length 5 m16.404 ft)Sub cable (2-core): CN-72-C1 (cable length 1 m3.281 ft), CN-72-C2 (cable length 2 m6.562 ft), CN-72-C5 (cable length 5 m16.404 ft)
Meáchan:
Net weight: 15 g approxGross weight: 20 g approx
Sonraí:
Amplifier (Connector type)
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Cábla | -(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.Main cable (4-core): CN-74-C1 (cable length 1 m3.281 ft), CN-74-C2 (cable length 2 m6.562 ft), CN-74-C5 (cable length 5 m16.404 ft)Sub cable (2-core): CN-72-C1 (cable length 1 m3.281 ft), CN-72-C2 (cable length 2 m6.562 ft), CN-72-C5 (cable length 5 m16.404 ft) |
| Meáchan | Net weight: 15 g approxGross weight: 20 g approx |
| Sonraí | Amplifier (Connector type) |
| Táirge | Digital Laser Sensor |
| Ábhar | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| Uimhir Chuid | LS-401P |
| Ainm an táirge | Digital Laser Sensor LS-400 |
| Am freagartha | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| Táscaire MODE | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| Uimhir Táirge | LS-401P |
| Voltas soláthair | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Feidhm an lasc ama | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| Síneadh cábla | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Taispeántas digiteach | 4 digit (green) + 4 digit (red) LED display |
| Taise chomhthimpeallach | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Roghnaigh táscaire | Yellow LED(lights up when either output 1 or output 2 is selected) |
| Friotaíocht turraing | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Teocht chomhthimpeallach | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Tomhaltas reatha | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| Táscaire oibríochta | Orange LED (lights up when output 1 and output 2 are ON) |
| Socrú íogaireachta | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| Feidhm an lasc ama: Am | 1 to 9,999 ms |
| Friotaíocht chreathadh | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Friotaíocht inslithe | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Táscaire astaíochta léasair | Green LED (lights up during laser emission) |
| Inmharthanacht voltais | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| Aschuir (Aschur 1, Aschur 2) | PNP open-collector transistor- Maximum source current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less [at 100 mA (Note) source current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| Feidhm choigeartaithe íogaireachta mín | Incorporated |
| Feidhm chosc uathoibríoch cur isteach | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| Aschuir (Aschur 1, Aschur 2): Oibriú aschuir | Selectable either Light-ON or Dark-ON, with jog switch |
| Aschuir (Aschur 1, Aschur 2): Cosaint gearrchiorcad | Incorporated |
| Ionchur seachtrach (Stop astaíochta léasair Teagasc lán-uathoibríoch / Teagasc teorann) | - |
Cur Síos ar an Táirge
LS400 series digital laser amplifier, PNP, connector
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
