I Stoc Táirge Te
UHLC2CEP
UHLC2CEP HL-C2CE-P PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, PNP-type
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Meáchan:
450 g approx.
Sonraí:
Controller
Táirge:
Ultra High-speed High-precision Laser Displacement Sensor
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Meáchan | 450 g approx. |
| Sonraí | Controller |
| Táirge | Ultra High-speed High-precision Laser Displacement Sensor |
| Ábhar | Case: Polycarbonate |
| Gabhálas | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| Uimhir Chuid | HL-C2CE-P |
| Athshocraigh an t-ionchur | Reset is done when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Aschur aláraim | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between alarm output and +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| Ainm an táirge | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| Ionchur ama | ON at/during connection to external power (+)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Ráta samplála | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| Aschur stróbach | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between strobe output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| Uimhir Táirge | HL-C2CE-P |
| Voltas soláthair | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Ionchur socraithe nialas | Zero set is ON when connected with external power (+).Zero set turns to OFF after continuously connected to external power (+) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Táscaire: Cumhacht | Green LED (lights up at power on) |
| Tomhaltas reatha | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| Táscaire: Aláram 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| Táscaire: Aláram 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| Ionchur rialaithe léasair | Laser emission is stopped when connected to external power (+).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Ionchur athraithe cuimhne | Memory is specified when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Ceann braiteora nascach | Number of connectable units: Max. 2 units. |
| Ionchur idirghlasála iargúlta | Laser emission is delayed when connected to IL (+).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Aschur analógach: Reatha | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| Aschur analógach: Voltas | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| Aschur breithiúnais (HI, GO, LO) | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between judgment output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| Aschur aláraim: Oibriú aschuir | Opened when the amount of light is insufficient |
| Aschur stróbach: Oibríocht aschuir | Opened at data determination |
| Aschur aláraim: Cosaint gearrchiorcaid | Incorporated |
| Aschur stróbach: Cosaint gearrchiorcaid | Incorporated |
| Táscaire: Ceann braiteora A Radaíocht léasair | Green LED (lights up during or immediately before laser emission of sensor head A) |
| Táscaire: Ceann braiteora B Radaíocht léasair | Green LED (lights up during or immediately before laser emission of sensor head B) |
| Friotaíocht chomhshaoil: Taise chomhthimpeallach | 35 to 85 %RH |
| Friotaíocht chomhshaoil: Friotaíocht turraing | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| Friotaíocht chomhshaoil: Teocht chomhthimpeallach | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Aschur breithiúnais (HI, GO, LO): Oibríocht aschuir | Opened at output operation |
| Friotaíocht chomhshaoil: Friotaíocht chreathadh | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| Aschur breithiúnais (HI, GO, LO): Cosaint gearrchiorcaid | Incorporated |
Cur Síos ar an Táirge
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, PNP digital output
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
