I Stoc Táirge Te
UHGTC111
UHGTC111 HG-TC111 PANASONIC HG-T Laser Displacement Sensor. High functionality slave controller, NPN output
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
:
When communication unitis connected
Mír:
Specifications
Cábla:
0.15 mm27-core composite cable, 2 m6.562 ftlong
Sonraí:
Slave unit / High performance type
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| When communication unitis connected | |
| Mír | Specifications |
| Cábla | 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| Sonraí | Slave unit / High performance type |
| Táirge | Controller |
| Ábhar | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Glanmheáchan | 140 g approx. |
| Uimhir Chuid | HG-TC111 |
| 1 go 7 aonad | 1 to 6 units |
| Ainm an táirge | Thru-beam Type Digital Displacement Sensor HG-T |
| 8 go 15 aonad | 7 to 14 units |
| Raon taispeána | -199.999 to 199.999 mm-7.874 to 7.874 in |
| Ráta samplála | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| Uimhir Táirge | HG-TC111 |
| Voltas soláthair | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Céim truaillithe | 2 |
| Rún taispeána | 1 μm0.039 mil |
| Airde oibriúcháin | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Tomhaltas reatha | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| Comhlíonadh rialála | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Ceann braiteora infheidhme | HG-T1010、HG-T1110 |
| Athrú ionchuir sheachtraigh | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| Athrú aschuir sheachtraigh | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| Meánlíon (am freagartha) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Líon na n-aonad sclábhaithe ceangailte | Maximum sink current and sourcecurrent of control output |
| Friotaíocht chomhshaoil: Cosaint | IP40(IEC) |
| Aschur analógach: Aschur reatha analógach | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Aschur analógach: Aschur voltais analógach | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Ionchur seachtrach (Ionchur 1, Ionchur 2, Ionchur 3) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| Uasmhéid líon na rialtóirí incheangailte | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| Friotaíocht chomhshaoil: Taise chomhthimpeallach | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Friotaíocht chomhshaoil: Friotaíocht turraing | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Aschur rialaithe (Aschur 1, Aschur 2, Aschur 3) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Friotaíocht chomhshaoil: Teocht chomhthimpeallach | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Friotaíocht chomhshaoil: Friotaíocht chreathadh | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| Friotaíocht chomhshaoil: Friotaíocht inslithe | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Friotaíocht chomhshaoil: Insheasmhacht voltais | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| Ionchur seachtrach (Ionchur 1, Ionchur 2, Ionchur 3): Am ionchuir | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Aschur rialaithe (Aschur 1, Aschur 2, Aschur 3): Aschur aláraim | Open when alarm occurs |
| Aschur rialaithe (Aschur 1, Aschur 2, Aschur 3): Aschur breithiúnais | N.O. / N.C. switching type |
| Aschur rialaithe (Aschur 1, Aschur 2, Aschur 3): Cosaint gearrchiorcaid | Incorporated (automatic reset type) |
Cur Síos ar an Táirge
HG-TC111_Controller_Thru-beam Type Digital Displacement Sensor HG-T_Slave unit / High performance type
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
