I Stoc Táirge Te
UFX505C2
UFX505C2 FX-505-C2 PANASONIC Fiber amplifier, NPN, analogue output, double display
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Cábla:
0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
Meáchan:
Net weight: 60 g approx.Gross weight: 100 g approx.
Sonraí:
Cable type
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Cábla | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| Meáchan | Net weight: 60 g approx.Gross weight: 100 g approx. |
| Sonraí | Cable type |
| Táirge | Digital Fiber Sensor |
| Ábhar | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Gabhálas | FX-MB1 (Amplifier protection seal): 1 set |
| Cosaint | IP40 (IEC) |
| Uimhir Chuid | FX-505-C2 |
| Ainm an táirge | Digital Fiber Sensor FX-500 Ver.2 |
| Aschur analógach | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| Am freagartha | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Ionchur seachtrach | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| Uimhir Táirge | FX-505-C2 |
| Voltas soláthair | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Feidhm an lasc ama | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| Síneadh cábla | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| Socruithe éagsúla | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Tomhaltas cumhachta | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| Aschur 1, Aschur 2 | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Teocht chomhthimpeallach | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Socrú íogaireachta | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Feidhm an lasc ama: Tréimhse an lasc ama | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Eilimint astaíochta (modhnaithe) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Comhlíonadh treoir marcáil CE | EMC Directive, RoHS Directive |
| Feidhm socraithe méid astaíochtaí | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Feidhm chosc cur isteach | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Aschur 1, Aschur 2: Pointí aschuir | 2 points |
| Feidhm ionchuir sheachtraigh fhéideartha | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| Aschur 1, Aschur 2: Oibriú aschuir | Switchable either Light-ON or Dark-ON by L/D mode |
| Raon taispeána déine solais teagmhais | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Ionchur seachtrach (inathraithe le hAschur 2) | - |
| Aschur 1, Aschur 2: Cosaint gearrchiorcaid | Incorporated |
Cur Síos ar an Táirge
FX-500 F Amplifier. Optical, analog output, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
