I Stoc Táirge Te
UFX102
UFX102 FX102 FX-102 PANASONIC Fiber amplifier, Long sensing range type, NPN, display, connector type
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Aschur:
NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
Meáchan:
Net weight: 15 g approx.Gross weight: 35 g approx.
Sonraí:
Long sensing range type
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Aschur | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Meáchan | Net weight: 15 g approx.Gross weight: 35 g approx. |
| Sonraí | Long sensing range type |
| Táirge | Digital Fiber Sensor |
| Ábhar | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Gabhálas | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Uimhir Chuid | FX-102 |
| Fad cábla | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Ainm an táirge | Digital Fiber Sensor FX-100 |
| Am freagartha | Emission frequency 1: 2.5 ms or less (factory default setting)Emission frequency 2: 2.8 ms or lessEmission frequency 3: 3.2 ms or lessEmission frequency 4: 5.0 ms or less |
| Ionchur seachtrach | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Uimhir Táirge | FX-102 |
| Voltas soláthair | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Feidhm an lasc ama | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Taispeántas digiteach | 4 digits (green) + 4 digits (red) LCD display |
| Taise chomhthimpeallach | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Friotaíocht turraing | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Modh ceangail | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Tomhaltas cumhachta | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Soilsiú comhthimpeallach | Incandescent light: 3,000 lx or less at the light-receiving face |
| Teocht chomhthimpeallach | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Táscaire oibríochta | Orange LED (lights up when the output is ON) |
| Socrú íogaireachta | 2-point teaching / Limit teaching / Full-auto teaching |
| Friotaíocht chreathadh | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Friotaíocht inslithe | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Aschur: Oibríocht aschuir | Selectable either Light-ON or Dark-ON, at SET mode |
| Inmharthanacht voltais | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Eilimint astaíochta (modhnaithe) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Comhlíonadh treoir marcáil CE | EMC Directive, RoHS Directive |
| Aschur: Cosaint gearrchiorcad | Incorporated |
| Feidhm socraithe méid astaíochtaí | 3-level + Auto setting (from production in December 2007) |
| Feidhm chosc cur isteach | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2, 3 or 4)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. |
| Feidhm choigeartaithe íogaireachta mín | Incorporated |
Cur Síos ar an Táirge
FX100 Amplifier F. Long distance optics, NPN output, NOT including cable CN14AC2
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
