I Stoc Táirge Te
UFX101CC2
UFX101CC2 FX101CC2 FX-101-CC2 PANASONIC Fiber amplifier, Standard type, NPN, display, connector type, 2m cab..
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Aschur:
NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
Meáchan:
Net weight: 15 g approx.Gross weight: 75 g approx.
Sonraí:
Standard type [Cable set]
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Aschur | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Meáchan | Net weight: 15 g approx.Gross weight: 75 g approx. |
| Sonraí | Standard type [Cable set] |
| Táirge | Digital Fiber Sensor |
| Ábhar | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Gabhálas | FC-FX-1(Protection cover): 1 pc. (Note)CN-14A-C2 (Connector attached cable, 2 m6.562 ftlong): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Uimhir Chuid | FX-101-CC2 |
| Fad cábla | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Ainm an táirge | Digital Fiber Sensor FX-100 |
| Am freagartha | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| Ionchur seachtrach | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Uimhir Táirge | FX-101-CC2 |
| Voltas soláthair | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Feidhm an lasc ama | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Taispeántas digiteach | 4 digits (green) + 4 digits (red) LCD display |
| Taise chomhthimpeallach | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Friotaíocht turraing | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Modh ceangail | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Tomhaltas cumhachta | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Soilsiú comhthimpeallach | Incandescent light: 3,000 lx or less at the light-receiving face |
| Teocht chomhthimpeallach | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Táscaire oibríochta | Orange LED (lights up when the output is ON) |
| Socrú íogaireachta | 2-point teaching / Limit teaching / Full-auto teaching |
| Friotaíocht chreathadh | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Friotaíocht inslithe | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Aschur: Oibríocht aschuir | Selectable either Light-ON or Dark-ON, at SET mode |
| Inmharthanacht voltais | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Eilimint astaíochta (modhnaithe) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Comhlíonadh treoir marcáil CE | EMC Directive, RoHS Directive |
| Aschur: Cosaint gearrchiorcad | Incorporated |
| Feidhm socraithe méid astaíochtaí | 3-level + Auto setting (from production in December 2007) |
| Feidhm chosc cur isteach | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| Feidhm choigeartaithe íogaireachta mín | Incorporated |
Cur Síos ar an Táirge
FX100 Amplifier F. Optical, NPN output, includes cable CN14AC2
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
