| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Cábla | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Aschur | Relay contact 1a- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour) |
| Meáchan | Net weight: 100 g approx. |
| Sonraí | Multi-voltage |
| Táirge | Adjustable Range Reflective Photoelectric Sensor |
| Ábhar | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Gabhálas | Adjusting screwdriver: 1 pc. |
| Histéiréis | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Cosaint | IP67 (IEC) |
| Uimhir Chuid | EQ-502 |
| Fad cábla | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Ainm an táirge | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Mód braite | - |
| Am freagartha | 20 ms or less |
| Uimhir Táirge | EQ-502 |
| Voltas soláthair | 24-240 V AC ±10 % or 12 to 240 V DC ±10 %Ripple P-P 10 % or less |
| Feidhm an lasc ama | - |
| Raon inchoigeartaithe | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Taise chomhthimpeallach | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Eilimint astaíochta | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Friotaíocht turraing | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Modh ceangail | Screw-on terminal connection |
| Coigeartóir achair | 2-turn mechanical adjuster with indicator |
| Eilimint glactha | 2-segment photodiode |
| Soilsiú comhthimpeallach | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Teocht chomhthimpeallach | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Táscaire oibríochta | Orange LED (lights up when the output is ON) |
| Táscaire cobhsaíochta | Green LED (lights up under stable operating condition) |
| Friotaíocht chreathadh | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Friotaíocht inslithe | 100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts |
| Aschur: Oibríocht aschuir | Switchable either Detection-ON or Detection-OFF |
| Inmharthanacht voltais | 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts |
| Tomhaltas cumhachta / reatha | AC: 4 VA or lessDC: 3 W or less |
| Comhlíonadh treoir marcáil CE | Low Voltage Directive, EMC Directive, RoHS Directive |
| Aschur: Cosaint gearrchiorcad | - |
| Feidhm chosc uathoibríoch cur isteach | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Raon braite (ag an achar socraithe uasta) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Treoir suiteála agus oibríochta