| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| PFHD | 6.10 × 10-9 |
| MTTFD | 100 years or more |
| Sonraí | Min. sensing object ø47 mmø1.850 intype (40 mm1.575 inbeam pitch) |
| Táirge | Safety Light Curtain Type 2 |
| Ábhar | Enclosure: AluminiumUpper and lower edges : Die-cast zine alloyInner case: Polycarbonate / Polyester resinCap: PBT |
| Páirc bhíoma | 40 mm1.575 in |
| Uimhir Chuid | SF2B-A8-P |
| Ainm an táirge | Safety Light Curtain Type 2 SF2B Ver.2 |
| Voltas cumhachta | 24 V DC plus or minus 15 % Ripple P-P 10 % or less |
| Am freagartha | OFF response: 15 ms or lessON response: 40 to 60 ms |
| Uimhir Táirge | SF2B-A8-P |
| Síneadh cábla | Extension up to total 30.5 m100.066 ftis possible for both emitter and receiver, with optional mating cables. |
| Raon oibriúcháin | 0.2 to 13 m0.656 to 42.651 ft(0.2 to 5 m0.656 to 16.404 ftwhen using the SF2B-CB05-B adapter cable) |
| Taise chomhthimpeallach | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Eilimint astaíochta | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Friotaíocht turraing | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Modh ceangail | Connector |
| Airde cosanta | 312 mm12.283 in |
| Soilsiú comhthimpeallach | Incandescent light: 3,500 lx or less at the light-receiving face |
| Teocht chomhthimpeallach | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃-13 to +158 ℉ |
| Tomhaltas reatha | Emitter: 35 mA or lessReceiver: 50 mA or less |
| Réad braite íosta | ø47 mmø1.850 inopaque object |
| Líon na gcainéal bhíoma | 8 |
| Friotaíocht chreathadh | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Friotaíocht inslithe | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Aschur cúnta (Aux) | PNP open-collector transistor- Max. source current: 60 mA- Applied voltage: same as supply voltage [between the auxiliary output and +V]- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m100.066 ftlength cable)(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used. |
| Feidhm stad astaíochtaí | Incorporated |
| Modh sioncrónaithe | Cable synchronization (optical synchronization when using SF2B-CB05-B) |
| Uillinn oscailte éifeachtach | plus or minus 5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / UL 61496-2)] |
| Caighdeáin is infheidhme: An tSeapáin | JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1) |
| Comhlíonadh treoir marcáil CE | Machinery Directive, EMC Directive, RoHS Directive |
| Caighdeáin is infheidhme: An Eoraip (AE) | EN 61496-1 (Type 2), EN 55011 |
| Aschuir rialaithe (OSSD 1, OSSD 2) | PNP open-collector transistor- Max. source current: 200 mA- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m100.066 ftlength cable) |
| Feidhm chosc cur isteach | Incorporated- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)SF2B-Hx and SF2B-Ax can be used together. (Note 2)[When using SF2B-CB05-B (optical synchronization):- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)- Parallel connection: 2 sets max.- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.SF2B-Hx and SF2B-Ax can be used together. (Note 2)](Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes. |
| Caighdeáin is infheidhme: Meiriceá Thuaidh | UL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) Not compatible when using the bottom cap cable SF2B-CB05-A. |
| Feidhm monatóireachta gléas seachtrach | Incorporated |
| Aschur cúnta (Aux): Mód oibríochta | When using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFFWhen using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted |
| Meáchan (Iomlán an astaire agus an ghlacadóra) | 400 g approx. |
| Aschur cúnta (Aux): Ciorcad cosanta | Incorporated |
| Caighdeáin infheidhme: Caighdeán idirnáisiúnta | IEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1) |
| Friotaíocht chomhshaoil: Céim chosanta | IP65 (IEC) (*IP67 is later than Ver.2) |
| Aschuir rialaithe (OSSD 1, OSSD 2): Mód oibríochta | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal) |
| Aschuir rialaithe (OSSD1, OSSD2): Ciorcad cosanta | Incorporated |
| Friotaíocht chomhshaoil: Voltas neart tréleictreach | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Treoir suiteála agus oibríochta