| Paraiméadar | Luach |
|---|---|
| Ainm | RSD-200D-48 |
| Stát | Recommended Model |
| Stoc | Yes |
| Formáid | Box |
| Sraith | RSD-200 |
| Ceaduithe | EC |
| Cumhacht (W) | 201,60 |
| Fo-fhormáid | IP20 |
| Leithead (mm) | 86.00 |
| Airde (mm) | 40.00 |
| Raon ionchuir | 2:1 |
| Feidhmchláir | Railway, Industrial, Telecommunications |
| Uasmhéid ionchuir DC | 143,00 |
| Ionchur DC Íosmhéid | 67,20 |
| Monaróir | MEAN WELL |
| Cineál táirge | Dc/DC converters |
| Leithlisiú (V) | 4.000,00 |
| Voltas aschuir | 48,00 |
| Buaicchumhacht (W) | 201.6 |
| Ionchur DC Raon | 67,2, 72, 75, 77, 88, 93,6, 100, 110, 143 |
| Nascóir ionchuir | Screw-Type |
| Fada/Cúlra | 191.00 |
| Cur Síos Fada | Dc/DC converter rail is a regulated isolated output.Converter for railway applications, industrial or telecommunications.Input range67,2-143Vcc(57,6-154Vcc for 1 second). Range rail to 72V input.Output voltage48vdc.Output intensity:14,2 A.Power:201,6 W.Isolation input-output 4000Vcc.Efficiency of the91%.Operating temperature from-40up+70 ° C(see the curve derived in the technical data sheet). 85 ° c for 10 minutes with ventilation by conduction.Dimensions (Length x Width x Height):191 x 86 x 40mm.3 years of warranty.Manufacturer: MEAN WELL.It is a converter designed for railway applications, industrial or telecommunications.Is certified with the regulations for railway EN50155 and EN45545-2 in front of the fire.Can operate up to 55C at full load and 70 ° C at 60% load or 70 ° C ambient temperature with ventilation by driving without losses. Also supports a temperature range of more demanding level rail Tx to 85ºC ambient temperature for 10 minutes with ventilation by driving on a metal surface.This converter semi-encapsulation has been designed for the most demanding applications at the level of vibration, temperature, and humidity. Has a low profile of only 40mm and uses only components prepared for high temperatures as for example capacitors of 105ºC.It has a low noise and ripple, and high efficiency and is protected against reverse polarity at the input. The inrush current is limited by a resistor in series with a MOSFET to reduce the peak starting current to reliably regardless of the ambient temperature.Its output is protected against short-circuits and overloads by limiting output current, this allows you to start loads with a high inrush. |
| Nascóir aschuir | Screw-Type |
| Barántas (Blianta) | 3,00 |
| Tír Bhunaidh | Taiwan |
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Treoir suiteála agus oibríochta