| Paraiméadar | Luach |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Nóta | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Cineál | PC terminal block can be aligned |
| Páirc | 5 mm |
| Toradh | Test passed |
| Aimplitiúid | 0.35 mm (10 Hz ... 60.1 Hz) |
| Minicíocht | 10 - 150 - 10 Hz |
| Leithead [w] | 35 mm |
| Airde [u] | 23 mm |
| Fad [l] | 11.2 mm |
| Leagan amach bioráin | Linear pinning |
| Spásáil bioráin | 5 mm |
| Luas scuabtha | 1 octave/min |
| Teocht | 850 °C |
| Líne táirgí | COMBICON Terminals M |
| Cineál táirge | Printed circuit board terminal |
| Trastomhas an phoill | 1.3 mm |
| Cineál gléasta | Wave soldering |
| Sonraíocht | IEC 60999-1:1999-11 |
| Líon na sraitheanna | 1 |
| Toisí bioráin | 0.9 x 0.9 mm |
| Teaghlach táirgí | MKDS 3 |
| Dath (Tithíocht) | black (9005) |
| Ábhar teagmhála | Cu alloy |
| Airde suiteáilte | 18 mm |
| Fad stialladh | 8 mm |
| Am nochta | 5 s |
| Modh ceangail | Screw connection with tension sleeve |
| Chasmhóiminte teannaithe | 0.5 Nm ... 0.6 Nm |
| Cineál pacáistithe | packed in cardboard |
| Sruth ainmniúil IN | 24 A |
| Voltas ainmniúil UN | 400 V |
| Céim an truaillithe | 3 |
| Líníocht thoisí | |
| Ábhar inslithe | PA |
| Nóta ar an iarratas | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Líon na bpost | 7 |
| Voltas rátáilte (II/2) | 630 V |
| Ceann scriú foirm tiomána | Slotted (L) |
| Trasghearradh ainmniúil | 2.5 mm² |
| Voltas rátáilte (III/2) | 400 V |
| Voltas rátáilte (III/3) | 250 V |
| Fad bioráin sádrála [P] | 5 mm |
| Fad tástála in aghaidh an ais | 2.5 h |
| Saintréithe dromchla | Tin-plated |
| Grúpa ábhar inslithe | I |
| Bioráin sádrála in aghaidh an phoitéinsil | 1 |
| CTI de réir IEC 60112 | 600 |
| Voltas borrtha rátáilte (II/2) | 4 kV |
| Trasghearradh seoltóra AWG | 24 ... 12 |
| Voltas borrtha rátáilte (III/2) | 4 kV |
| Voltas borrtha rátáilte (III/3) | 4 kV |
| Trasghearradh seoltóra righin | 0.2 mm² ... 4 mm² |
| Teocht chomhthimpeallach (tionól) | -5 °C ... 100 °C |
| Teocht chomhthimpeallach (oibriú) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Voltas inslithe rátáilte (II/2) | 630 V |
| Trasghearradh seoltóra solúbtha | 0.2 mm² ... 2.5 mm² |
| Nóta ar thrasghearradh naisc | With connected conductor 4 mm² (solid). |
| Voltas inslithe rátáilte (III/2) | 400 V |
| Voltas inslithe rátáilte (III/3) | 250 V |
| achar íosta creepála (II/2) | 3.2 mm |
| Riachtanas tástála ardú teochta | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| íosachar creepage (III/2) | 3 mm |
| íosachar creepage (III/3) | 3.2 mm |
| Taiseachas coibhneasta (stóráil/iompar) | 30 % ... 70 % |
| Rátáil inadhainteachta de réir UL 94 | V0 |
| Teocht chomhthimpeallach (stóráil/iompar) | -40 °C ... 70 °C |
| Innéacs rianaithe comparáideach (IEC 60112) | CTI 600 |
| Limistéar sádrála dromchla miotail (an ciseal barr) | Tin (4 - 8 µm Sn) |
| Pointe críochfoirt dromchla miotail (an ciseal barr) | Tin (4 - 8 µm Sn) |
| 2 sheoltóir leis an trasghearradh céanna, soladach | 0.2 mm² ... 1.5 mm² |
| Friotaíocht inslithe, suíomhanna comharsanacha | > 5 MΩ |
| 2 sheoltóir leis an trasghearradh céanna, solúbtha | 0.2 mm² ... 1.5 mm² |
| luach imréitigh íosta - réimse neamh-aonchineálach (II/2) | 3 mm |
| luach imréitigh íosta - réimse neamh-aonchineálach (III/2) | 3 mm |
| luach imréitigh íosta - réimse neamh-aonchineálach (III/3) | 3 mm |
| Trasghearradh seoltóra, solúbtha, le ferrule, le muinchille plaisteach | 0.25 mm² ... 2.5 mm² |
| Trasghearradh seoltóra solúbtha, le ferrule gan muinchille plaisteach | 0.25 mm² ... 2.5 mm² |
| Trasghearradh seoltóra/cineál seoltóra/pointe socraithe fórsa tarraingthe/luach iarbhír | 0.2 mm² / solid / > 10 N |
| 2 sheoltóir leis an trasghearradh céanna, solúbtha, le feiriú gan muinchille plaisteach | 0.25 mm² ... 0.75 mm² |
| 2 sheoltóir leis an trasghearradh céanna, solúbtha, le feiriú TWIN le muinchille plaisteach | 0.5 mm² ... 1.5 mm² |
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Treoir suiteála agus oibríochta