I Stoc Táirge Te
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Meáchan:
Net weight: 300 g approx.
Sonraí:
Controller
Táirge:
Ultra High-speed Laser Displacement Sensor [CCD Style]
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Meáchan | Net weight: 300 g approx. |
| Sonraí | Controller |
| Táirge | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| Gabhálas | - |
| Uimhir Chuid | HL-C1C-M |
| Aschur aláraim | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Fad cábla | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| Ainm an táirge | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| Ráta samplála | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| Feidhmeanna coinnigh | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Uimhir Táirge | HL-C1C-M |
| Voltas soláthair | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Scagairí digiteacha | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Táscairí: DORCHA | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| Ionchur socraithe nialas AR | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Calabrú: Réise | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Ionchur socraithe nialas | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Calabrú: Aistriú | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Tomhaltas reatha | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| Táscairí: GEAL | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| Feidhmeanna ríofa | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Ionchur/aschur sraitheach | RS-232C |
| Ceann braiteora nascach | Maximum 2 sensor heads |
| Aschur analógach: Reatha | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| Aschur analógach: Voltas | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| Meánlíon na samplaí | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Aschuir bhreithiúnais (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Táscairí: Astaíocht léasair | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| Saintréithe teochta | plus or minus 0.01 % F.S./degrees |
| Ionchur ama (Astaíocht léasair) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| Aschur aláraim: Oibriú aschuir | Opened when the amount of light is excessive or insufficient. |
| Aschur aláraim: Cosaint gearrchiorcaid | Incorporated |
| Friotaíocht chomhshaoil: Taise chomhthimpeallach | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Friotaíocht chomhshaoil: Friotaíocht turraing | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| Aschuir bhreithiúnais (O1, O2): Oibríocht aschuir | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| Friotaíocht chomhshaoil: Teocht chomhthimpeallach | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Friotaíocht chomhshaoil: Friotaíocht chreathadh | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| Aschuir bhreithiúnais (O1, O2): Catagóir úsáide | DC-12 or DC-13 |
| Aschuir bhreithiúnais (O1, O2): Cosaint gearrchiorcaid | Incorporated |
Cur Síos ar an Táirge
More details
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
