I Stoc Táirge Te
HC-M-HS 200/70-MOD-BU-PE
HC-M-HS 200/70-MOD-BU-PE 1636910 PHOENIX CONTACT Contact insert module
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
GTIN:
4046356095228
Nóta:
Made to Order (non-returnable)
Eochair Ordaithe:
1636910
Leathanach catalóige:
Page 551 (C-4-2015)
Faisnéis faoi Sholáthraithe
Táirgí: 0
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| GTIN | 4046356095228 |
| Nóta | Made to Order (non-returnable) |
| Eochair Ordaithe | 1636910 |
| Leathanach catalóige | Page 551 (C-4-2015) |
| Aonad pacála | 1 pc |
| Tír thionscnaimh | DE (Germany) |
| Uimhir taraife saincheaptha | 85366990 |
| (Coinníollacha comhthimpeallacha) | 16 mm (70 mm²) |
| Ábhar teagmhála (Ginearálta) | Copper alloy |
| Reatha rátáilte (Toisí) | 200 A |
| Leithead (Sonraí Tráchtála Príomhúla) | 34.2 mm |
| Airde (Sonraí Tráchtála Príomhúla) | 54.3 mm |
| Fad (Sonraí Tráchtála Príomhúla) | 29.4 mm |
| Próifíl nasc (Toisí) | PE |
| Ábhar iompróra teagmhála (Ginearálta) | PC |
| Ábhar dromchla teagmhála (Ginearálta) | Ag |
| Sraith (Saintréithe Meicniúla) | HC-M-HS |
| Meáchan in aghaidh an phíosa (gan pacáil san áireamh) | 95.100 g |
| Soicéad heicseagánach (Coinníollacha comhthimpeallacha) | WAF 5 |
| Chasmhóiminte teannaithe (Coinníollacha comhthimpeallacha) | 9 Nm (40 - 50 mm²) |
| Ceangal (Saintréithe Meicniúla) | Note on axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Use of cables with a geometric cross section that differs greatly from the nominal cross section of the cable should be checked before use.The wiring space for axial screw technology is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) should be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The wires should be inserted as far as they will go into the contact chamber (until the insulation touches the contact). Hold the wires in position and use the socket wrench to tighten. The used wire end should be cut off before connecting again. The connection screw may only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable should be mechanically intercepted at an appropriate distance from the connection point (e.g., by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. The module cannot be used simultaneously with HC-B..-TMB-SD-IP65 and HC-B..-TMS-SD-IP65 protective covers.PE mounting plateThe PE plate must be pressed hard against the swing frame using the 4 screws. First loosen the 4 screws of the PE plate and then tighten them again once the module is fixed in the swing frame. |
| Airde íosta tithíochta (Coinníollacha comhthimpeallacha) | 72 mm |
| Trasghearradh seoltóra (Coinníollacha comhthimpeallacha) | 40 mm² ... 70 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Modh ceangail (tréithe meicniúla) | Axial screw connection |
| Ceangal de réir an chaighdeáin (Sonraí ábhartha) | UL |
| Timthriallta iontrála/aistarraingthe (Coinníollacha comhthimpeallacha) | ≥ 500 |
| Trasghearradh nasc AWG (Coinníollacha comhthimpeallacha) | 1 ... 00 |
| Treoracha tionóil (Saintréithe meicniúla) | - Use only flexible conductors,- Connection of wires with 5 mm an Allen wrench,- Housing height h ≥ 72 mm,- Connectors may only be operated without load/voltage. |
| Líon na sliotán modúl (tréithe meicniúla) | 2 |
| Rátáil inadhainteachta de réir UL 94 (Sonraí ábhartha) | V0 |
| Trastomhas sreinge lena n-áirítear insliú (Coinníollacha comhthimpeallacha) | 12 mm (40 mm²) |
| Teocht chomhthimpeallach (oibriú) (Saintréithe leictreacha) | -40 °C ... 125 °C |
| Fad stialladh na sreinge aonair (Coinníollacha comhthimpeallacha) | 16 mm |
| Rátáil inadhainteachta de réir UL 94 (Saintréithe meicniúla) | V0 |
Cur Síos ar an Táirge
More details
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
