I Stoc Táirge Te
HC-M-02-MOD-ST
HC-M-02-MOD-ST 1679346 PHOENIX CONTACT HEAVYCON contact insert module, male, 2-pos., axial screw connection
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
:
Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
Leithead:
34.2 mm
Airde:
41.8 mm
Fad:
14.6 mm
Faisnéis faoi Sholáthraithe
Táirgí: 0
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| Leithead | 34.2 mm |
| Airde | 41.8 mm |
| Fad | 14.6 mm |
| Sraith | HC-M-02 |
| Ginearálta | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| Feidhmchlár | Power |
| Cineál táirge | Modular contact insert |
| Nóta tionóil | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| Sruth rátáilte | 40 A |
| Ábhar teagmhála | Copper alloy |
| Soicéad heicseagánach | SW 2 |
| Uimhriú teagmhála | 1 - 2 |
| Chasmhóiminte teannaithe | 1.5 Nm (2.5 mm² ... 4 mm²) |
| Próifíl nasc | 2 |
| Céim an truaillithe | 3 |
| Líníocht thoisí | |
| Líon na bpost | 2 |
| Voltas borrtha rátáilte | 8 kV |
| Catagóir róvoltais | III |
| Teicneolaíocht nasctha | Axial screw connection |
| Voltas rátáilte (III/3) | 1000 V |
| Líon na sliotán modúl | 1 |
| Trasghearradh seoltóra | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Ábhar iompróra teagmhála | PC |
| Ábhar dromchla teagmhála | Ag |
| Timthriallta iontrála/aistarraingthe | ≥ 500 |
| Trasghearradh nasc AWG | 12 ... 10 |
| Teocht chomhthimpeallach (oibriú) | -40 °C ... 125 °C |
| Ceangal de réir an chaighdeáin | IEC / EN |
| Rátáil inadhainteachta de réir UL 94 | V0 |
| Fad stialladh na sreinge aonair | 8 mm +1 mm (for 6 mm²) |
Cur Síos ar an Táirge
More details
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
