I Stoc Táirge Te
FM-252-4
FM-252-4 PANASONIC flow sensor FM200, 500ml/minø4,NPN
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Meáchan:
Net weight: 50 g approx., Gross weight: 115 g approx.
Sonraí:
Resin body type
Taispeáin:
4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Meáchan | Net weight: 50 g approx., Gross weight: 115 g approx. |
| Sonraí | Resin body type |
| Taispeáin | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Táirge | Integrated Display Type Digital Flow Sensor |
| Ábhar | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| Líneacht | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| Méid an chalafoirt | ø4 ø0.157 push-in |
| Cosaint | IP40 (IEC) |
| Gabhálais | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| Uimhir Chuid | FM-252-4 |
| Fad cábla | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| Ainm an táirge | Integrated Display Type Digital Flow Sensor FM-200 |
| In-athdhéantacht | Within ±1 % F.S. |
| Ionchur seachtrach | ON voltage: 0 to +0.4 VOFF voltage: +5 V to +V, or openInput time: 80 ms or more |
| Uimhir Táirge | FM-252-4 |
| Voltas soláthair | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| Taise chomhthimpeallach | 35 to 90 % RH, Storage: 35 to 90 % RH |
| Sreabhán infheidhme | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| Friotaíocht turraing | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Modh ceangail | Connector |
| Aschur comparáideach | NPN open-collector transistor・Maximum sink current: 50 mA or less・Applied voltage: 26.4 V DC or less (between comparative output and 0 V)・Residual voltage: 2.4 V or less (at 50 mA sink current) |
| Talmhú imfhálúcháin | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| Teocht chomhthimpeallach | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| Tomhaltas reatha | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| Ráta sreafa lánscála | 500 mℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| Raon brú rátáilte | -0.09 to +0.7 MPa |
| Friotaíocht chreathadh | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| Aschur voltais analógach | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| Friotaíocht inslithe | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| Raon dearbhaithe cruinnis | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| Saintréithe brú | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| Inmharthanacht voltais | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| Inmharthanacht brú | 1 MPa |
| Luach comhtháite sonraithe | 5 mℓ |
| Saintréithe teochta | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| Aschur comparáideach: Histéiréis | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| Comhlíonadh treoir marcáil CE | EMC Directive, RoHS Directive |
| Aschur comparáideach: Modhanna aschuir | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| Ráta sreafa meandarach: Raon taispeána | -550 to +550 mℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Aschur comparáideach: Am freagartha | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| Ráta sreafa comhtháite: Raon taispeána | ±9999999 mℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Aschur comparáideach: Cosaint gearrchiorcad | Incorporated |
| Ráta sreafa meandarach: Socrú agus réiteach taispeána | 1 mℓ/min. |
| Ráta sreafa comhtháite: Socrú agus taispeána réiteach | 1 mℓ |
Cur Síos ar an Táirge
More details
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
