| Paraiméadar | Luach |
|---|---|
| Fiber amplifierconnector | |
| Mír | Functions |
| Cruth | Type |
| Feidhmeanna | Power tuning |
| Réamhshreangaithe | AND/OR output |
| Aschur NPN | PNP output |
| Socruithe ionchuir/aschur | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| Am freagartha | Super-high-speed mode |
| Mód caighdeánach | 1 ms for operation and reset respectively |
| Feidhm an lasc ama | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Taispeántais dhigiteacha | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| Ciorcaid chosanta | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| Socrú íogaireachta | Teaching and digital up/down keys |
| Céim chosanta | IEC 60529 IP50 (with protective cover attached) |
| Mód ardtaifigh | 4 ms for operation and reset respectively |
| Voltas soláthair cumhachta | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Cónascaire aimplitheora snáithín1 | AND/OR output |
| Foinse solais (fad tonn) | Red LED (650 nm) |
| Cábla PVC 30 cm le nascóir breiseán M8 (4 bioráin) | E3X-CN21-M3J-2 0.3M |
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Treoir suiteála agus oibríochta