| Paraiméadar | Luach |
|---|---|
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| Fiús | electronic |
| Nóta | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| Doimhneacht | 111.3 mm (incl. DIN rail 7.5 mm) |
| Leithead | 12.4 mm |
| Airde | ≤ 4000 m (amsl) |
| Ábhar | PA 6 |
| Éifeachtúlacht | > 99 % |
| Cineál táirge | Device circuit breakers |
| Titim voltais | 0.06 V (at 4 A) |
| Tástáil taise | 96 h, 95 % RH, 40 °C |
| Cineál gléasta | pluggable onto CAPAROC CR… current rail |
| Voltas rátáilte | 12 V DC |
| Am múchta | 5 s (with overload 1.1…1.3 x INat IN≥ 4 A) |
| Aitheantas | UL/C-UL Listed UL 508 |
| Teaghlach táirgí | CAPAROC |
| LED an chainéil múchta | off (Channel switched off) |
| Cainéal LED dearg | lit (Channel switched off, over- or undervoltage active) |
| Líon na gcainéal | 2 |
| Líon na sliotán | 2 |
| Moill lasctha | 50 ms (each channel preset by default) |
| Modh tripping | E (electronic) |
| Céim truaillithe | 2 |
| Rang cosanta | III |
| Reatha rátáilte IN | 4 A DC (per channel) |
| Fad stialladh | 10 mm |
| Cainéal LED glas | lit (Channel switched on) |
| Modh ceangail | Push-in connection |
| Trasghearradh AWG | (converted acc. to IEC) |
| Eilimint sábháilteachta teipe | 5 A DC (per output channel) |
| Voltas oibriúcháin | 10 V DC ... 30 V DC |
| Diomailt cumhachta | typ. 0.6 W (no load at 24 V) |
| Turraing (oibríocht) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| Cainéal LED buí | lit (Channel switched on, channel load > 80% ) |
| Neart tréleictreach | 35 V DC (Load circuit) |
| Líníocht thoisí | |
| Friotaíocht aiseolais | max. 35 V DC |
| Líon na bpost | 1 |
| Voltas borrtha rátáilte | 0.5 kV |
| Céim chosanta | IP20 |
| Ualach toilleasach uasta | ≤ 60000 µF (Depending on the current setting and the short-circuit current available) |
| Fiús cúltaca riachtanach | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| Cainéal LED dearg-uaine | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
| Tomhas caoinfhulaingt I | ± 10 % (typ.) |
| Creathadh (oibriú) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| Cainéal LED dearg-buí | flashing (Channel is overloaded and is switched off) |
| Múchadh róvoltais | ≥ 32.5 V DC (active) |
| Múchadh faoi-voltais | ≤ 8.5 V DC (active) |
| Caighdeáin/sonraíochtaí | EN 61000-6-2 |
| Teorannú reatha gníomhach | typ. 2.0 x INat IN≤ 3 A |
| Sruth ciorcaid dúnta I0 | typ. 25 mA (no load at 24 V) |
| MTBF (IEC 61709, SN 29500) | 11364927 h (at 25 °C with 21 % load) |
| Trasghearradh seoltóra AWG | 24 ... 12 |
| Sruth rátáilte (réamhchoigeartaithe) | 1 A |
| Trasghearradh seoltóra righin | 0.2 mm² ... 4 mm² |
| Teocht chomhthimpeallach (oibriú) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| Trasghearradh seoltóra solúbtha | 0.2 mm² ... 4 mm² |
| Cumas lasctha gearrchiorcaid | 300 A |
| Rátáil inadhainteachta de réir UL 94 | V-0 |
| Teocht chomhthimpeallach (stóráil/iompar) | -40 °C ... 70 °C |
| Trasghearradh seoltóra, solúbtha, le ferrule, le muinchille plaisteach | 0.25 mm² ... 4 mm² |
| Trasghearradh seoltóra solúbtha, le ferrule gan muinchille plaisteach | 0.25 mm² ... 4 mm² |
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Treoir suiteála agus oibríochta