I Stoc Táirge Te
AFP7HSC2T
AFP7HSC2T PANASONIC FP7 High Speed Counter Modul, 2 x 2 phase high speed counter (16MHz/4 multiple), 4 trans..
$0.00
USD
i stoc
Sonraíochtaí Príomhúla
Mír:
Specifications
Táirge:
FP7 High-speed Counter Units
Uimhir Chuid:
AFP7HSC2T
Ainm an táirge:
FP7 High-speed Counter
Faisnéis faoi Sholáthraithe
PANASONIC
Táirgí: 4316
Seoltar laistigh de 2-3 lá gnó de ghnáth
Cáilíocht Ráthaithe
Loingseoireacht Thapa
Tacaíocht Theicniúil
Sonraíochtaí Teicniúla
| Paraiméadar | Luach |
|---|---|
| Mír | Specifications |
| Táirge | FP7 High-speed Counter Units |
| Uimhir Chuid | AFP7HSC2T |
| Ainm an táirge | FP7 High-speed Counter |
| Uimhir Táirge | AFP7HSC2T |
| Ionchur: Modh inslithe | Photocoupler insulation |
| Ionchur: Voltas ionchuir rátáilte | 12 to 24 V DC / 3.5 to 5 V DC |
| Feidhm chomhairimh: Cineál cuntair | Linear counter / Ring counter |
| Feidhm chomhairimh: I/O seachtrach | Control signal input: 4 points (2 points/ch), External output: 4 points (2 points/ch) |
| Feidhm chomhairimh: Comhartha ionchuir | Phases A, B and Z |
| Ionchur: Impedance ionchuir: 5 V DC | 390 Ohm (5 V DC) approx. |
| Feidhm chomhairimh: Raon comhairimh | Signed 32-bit (-2,147,483,648 to +2,147,483,647) |
| Ionchur: Impedance ionchuir: 24 V DC | 3.0 kOhm approx. |
| Feidhm chomhairimh: Líon na gcuntar | 2ch |
| Ionchur: Raon voltais úsáide: 5 V DC | 3.5 to 5.25 V DC |
| Feidhmeanna eile: Feidhm ghabhála | Acquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured. |
| Feidhm chomhairimh: Cineál ionchuir chuntair | Individual input (Phases A and B): 1 multiple, 2-multipleDirection discrimination input: 1 multiple, 2-multiple2-phase input: 1 multiple, 2-multiple, 4-multiple |
| Ionchur: Socrú tairiseach ama ionchuir | None, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s |
| Ionchur: Raon voltais úsáide: 24 V DC | 10.8 to 26.4 V DC |
| Feidhm chomhairimh: Minicíocht ionchuir uasta | 4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %) |
| Feidhmeanna eile: Feidhm ionchuir idirbhriseadh | Available (2 points/ch, Max. 8 points/unit)(Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs.(Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number. |
| Ionchur: Íosvoltas AR / Íosreatha AR: 5 V DC | 3.0 V DC / 4 mA |
| Feidhm chomparáide: Feidhm mheaitseála luach sprice | Depending on the count direction, sets or resets the output when the counter value reaches the target value. |
| Ionchur: Íosvoltas AR / Íosreatha AR: 24 V DC | 10 V DC / 4 mA |
| Ionchur: Uasvoltas AS / Uasreatha AS: 5 V DC | 1.0 V DC / 0.5 mA |
| Aschur seachtrach: Feidhm aschuir toraidh comparáide | Outputs the result of comparison function. |
| Ionchur: Uasvoltas AS / Uasreatha AS: 24 V DC | 2.0 V DC / 2 mA |
| Feidhm tomhais: Feidhm tomhais minicíochta | Measures the intervals between the variations of count values, and calculates the frequency. |
Cur Síos ar an Táirge
FP7 Expansion. High Speed Counting Module, 2 Dual Phase Channels, 4 Interrupt Inputs, 4 Configurable SD NPNs (NPNs)
Príomhghnéithe
- Cáilíocht ghrád tionsclaíoch
- Comhlíontach le RoHS
- Deimhnithe CE
- Barántas 1 bhliain
Doiciméid Táirge
Bileog Sonraí
Sonraíochtaí teicniúla agus sonraí feidhmíochta
Lámhleabhar Úsáideora
Treoir suiteála agus oibríochta
